Welcome to mac4xp’s blog:
i spilled water on my macbook and the keyboard won’t work”
“i spilled water on my macbook and it won’t turn on”
“spilled water on macbook, how long to let dry”
spilled water on macbook air keyboard
“spilled water on macbook keyboard”
if you are also searching for similar queries on web, then this article is for you. In this post, we will discuss What do I do if my Mac won’t turn on after spilling water.
Spilling water or another liquid on your Mac can be a very scary experience. The liquid damage may cause the components to short-circuit, and thus prevent the computer from powering on. However, there are a number of troubleshooting steps that you may take to get your Mac working again.
Below are 10 fixes to try if your Mac won’t turn on after spilling water.
Act Quickly :
In case of a spillage, remove the power cord and battery immediately. If only you could stop electrical power from flowing in circuits as soon as possible.
Disconnect power :
If you spilt the fluid while your Mac was turned on, quickly detach the power cable and other connected cables or devices. Switching off suddenly might save from further damages.
Liquids should be drained off :
Place your computer upside down or tilt it so that any accumulated fluid can flow through openings such as keyboard or ventilation ports. Wipe off any remaining drops with dry cloth.
Dry components :
Before trying to switch it back on again, allow your Mac plenty of time (at least 24-48 hours) for complete drying out. The longer period one gives it to dry out is usually better. Place it into a warm dry place with good air circulation in order to quicken up this process.
Eject the Water :
Use compressed air to force out remaining drops of water in ports, crevices and orifices. Also, check for corroded parts and clean them using rubbing alcohol.
Drain the Battery :
If you have a removable battery, remove it and let it dry completely before putting back. This helps to prevent short circuits.
Try Rice :
Place your MacBook in a bag full of rice. The rice will extract moisture from within your MacBook.
Use a Fan :
Put a fan on top of the Mac that will make air pass over its surface hence hasten the drying process. One can also circulate air around by rotating the Mac.
External keyboard and mouse :
Built-in input devices might be damaged because of liquid spills. Try connecting an external keyboard as well as mouse instead so that you can be able to control and start up your Mac with them.
Reset SMC and NVRAM :
After completely drying off, these resets may help your Mac bounce back after possible system problems or bugs which are not allowing it to turn on.See instructions for both resets that apply to your device model.
What to do if the above steps don’t work on my Mac
Take It to the Genius Bar – Apple technicians have the best chance of identifying problems and coming up with possible solutions. If your Mac won’t start after taking all other options, then Apple or an authorized service provider may be able to do a thorough evaluation including cleaning the corrosion, replace damaged parts if any and data recovery could be attempted if required.
Final Thoughts
Carefully drying it out, cleaning away corrosion, resetting components, and accessing it externally can help you fix your Mac if it gets wet. Hopefully these steps will help you fix if your Mac won’t turn on after spilling water.
NEXT READ THIS:
